KITO Uni-directional end-of-line liquid detonation flame arrester
|
KITO Uni-directional end-of-line liquid detonation flame arrester Products advantages As end-of-line armature, detonation-proof and flameproof, used for mounting on the pipes end of filling pipes inside of tanks, in which inflammable liquids of the explosion groups IIA1 to IIB3 are stored, with a nominal gap width (MESG) of ≥ 0.65 mm and an maximum operating temperature of 60 °C. Tested and approved as detonation flame arrester type 4. Particularly suitable for horizontal and underground vessels. Mounting position is perpendicular. It is only allowed to install pipes of nominal widths ≤ than the nominal widths of the flange. The body of the housing has to be permanently filled with storage liquid. Equipped with a hexagon head pipe plug for emptying the liquid. |
||||||||||||||
|
Technical specifications |
|
|||||||||||||
|
Housing / valve seat edge |
cast steel 1.0619, cast steel 1.4408 |
|||||||||||||
|
Max. working Pressure |
NA |
|||||||||||||
|
Max. working Temperature |
60 °C |
|||||||||||||
|
MESG |
MESG> 0.65 mm. |
|||||||||||||
|
Nominal Diameter |
DN 25 - DN 250 | 1" - 10" |
|||||||||||||
|
Temperature sensor |
NA |
|||||||||||||
|
Flange connection |
EN 1092-1 Typ type B1, ASME B16.5 Class 150 RF, API standard 650 (optionally) |
|||||||||||||
|
Industries
|
|
|||||||||||||
|
||||||||||||||
