KITO Bi-directional in-line detonation flame arrester
|
Products advantages For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion group IIA1 with a maximum experimental safe gap (MESG) ≥ 1.14 mm. Bi-directionally working in pipes, whereby an operating pressure of 2.5 bar abs. and an operating temperature of 60 °C must not be exceeded. The installation of the detonation flame arrester into horizontal and vertical pipes is permissible. Provided with one or two temperature sensors (PT 100) the armature is certified against short time burning from one or both sides. Ifonly one thermal sensor is attached, it must be installed into that part of the body from which a fire is expected. |
||||||||||||||
|
Technical specifications |
|
|||||||||||||
|
Housing / valve seat edge |
cast steel 1.0619, cast steel 1.4408 |
|||||||||||||
|
Max. working Pressure |
2.5 barg |
|||||||||||||
|
Max. working Temperature |
60 °C |
|||||||||||||
|
MESG |
MESG> 1.14 mm. |
|||||||||||||
|
Nominal Diameter |
DN 25 - DN 300 | 1" - 12" |
|||||||||||||
|
Temperature sensor |
Optionally£¨PT 100, connection 3/8“, 1.4571£© |
|||||||||||||
|
Flange connection |
EN 1092-1 Typ type B1, ASME B16.5 Class 150 RF, API standard 650 (optionally) |
|||||||||||||
|
Industries
|
|
|||||||||||||
|
||||||||||||||
