REMBE Explosion Venting EDP
|
Products advantages
The domed, single layer explosion vent is suitable for use in processes with medium vacuum or overpressure (up to 70 % of min. response pressure (pstat)) and slight pressure cycling. It is particularly suitable for vessels with pneumatic filling equipment and for filters and sieves with strong vibration. The standard bursting pressure is 0.1 bar at 22 °C (71.6 °F).
|
|
|
n High stability and pressure cycling resistance. |
|
|
n Quick and easy installation |
|
|
n Significant space savings due to the integrated gasket and tensioning frame in the explosion vent. |
|
|
|
|
|
Technical specifications |
|
|
Standard burst pressure Pstat |
0.1 bar at 22 °C (71.6 °F) |
|
Max. permitted operating pressure |
Up to 70 % of Pstat |
|
Temperature |
− 40 to + 180 °C (− 40 to + 356 °F) |
|
Material |
Stainless steel |
|
Gasket material |
EPDM, silicon, foam rubber |
|
Tolerance |
± 20 % at standard burst pressure |
|
Standard vacuum resistance |
Up to 500 mm HO (WC) to 0.64 m²/ Up to 300 mm HO (WC) from 0.65 m² |
|
Recommended tightening torque for M10 bolt |
15 – 20 Nm |
|
Industries |
||||
|
||||
