Discflo Sanitary Pumps
|
Products advantages Discflo offers two lines of sanitary pumps, the SP Series and MIS Series. Both series meet 3-A sanitary and international hygiene standards and USDA requirements. They can be supplied in Clean-in-Place or Steam-in-Place versions, and in a variety of metallurgy to meet the user’s requirements.
|
|
|
n Discflo SP sanitary pumps use the unique non-impingement Discpac technology to pump delicate fluids, e.g. soft foodstuffs (corn, fruit, etc) and pharmaceutical products, without damage, and handle shear sensitive fluids, such as citrus oils, without emulsification. The user benefits not only from lower pump operating costs, but also from higher processing yields and better quality product. |
|
|
n The MIS line of centrifugal pumps offers users a heavy-duty, easy-to-clean unit at a very competitive price. Using a unique impeller with an integral inducer, the MIS pump can operate at lower positive suction heads for the same flow rate than other centrifugal pumps. |
|
|
n Low NPSH Requirements Laminar flow means low NSPH. It prevents reduction in head and capacity and further reduces noise and vibration. The NPSH is about half to one-third of a centrifugal pump in the same service conditions. n Little maintenance required-The pump wears so slowly that spare parts and maintenance requirements are reduced dramatically, over 90% in many applications. n Few spare parts-The Disc pump comes with no recommended spare parts list, simply because it rarely needs them. n Little or No downtime-Regularly scheduled maintenance for normal bearing lubrication and seal flush is generally all that’s needed to keep the pump operating. n Solve the hard to pump problems-Protecting the Shear-sensitive and delicate solids. n Heavy Duty Shaft-Near zero Radial and Axial loads. There is less than 0.002-inch shaft deflection under the full-load, full-speed pumping. The bearing is a Disc pump will last in excess of 80,000hours with proper lubrication. |
|
|
Applications
|
|
|
n Viscous and high solid fluids. |
|
|
n Abrasive fluids-lime sludge, Bio-solids sludge, Sand slurries with up to 80% solids. |
|
|
n Air or gas-entrained fluids |
|
